TEN COMMON MISCONCEPTIONS ABOUT SECURITY LOCK FOR VAN THAT AREN'T ALWAYS THE TRUTH

Ten Common Misconceptions About Security Lock For Van That Aren't Always The Truth

Ten Common Misconceptions About Security Lock For Van That Aren't Always The Truth

Blog Article

Choosing the Right Security Lock For Your Van

A secure lock can deter thieves and help safeguard your cargo. Some locks are made to allow DIY installation, but others require help from a professional to ensure that they're properly installed and provide the best security.

Slam locks are great for couriers who make a lot of deliveries. They lock automatically when the door is slammed shut. Deadlocks are designed to work with the manufacturer's lock and offer an additional layer of security.

Deadlocks

Van dead locks are a further physical security measure that provides an effective deterrent for criminals. These specialised aftermarket locks protrude into the van's door and are attached to the frame, ensuring they cannot be opened unless the key is used. These locks are ideal for vans that must be parked overnight, or are carrying expensive equipment.

They are ideal for those who use the factory remote locking systems during the day but would like to add a layer of security at night or when their vehicle is in an area that they believe to be vulnerable. When operated by a key the bolt is thrown into a receiver attached to the body section opposite of the vehicle. This provides an extra layer of security over the factory locks.

Contrary to Slam locks and Hook Locks (both also available from our online store) which can be locked automatically when the door is closed They require the driver to manually operate them using the supplied key. A straight bar lock can be used on rear doors and twin sliding doors, whilst hook locks are suitable for the front or rear doors of medium to small vans.

They are both designed to stop a thief attacking the lock and forcing open the door, which could allow them access to your van's cab space or loading area. They're specifically designed for each type of van and are placed in the most optimal position to offer an additional layer of protection against a specific attack techniques.

The consequences of theft can be significant for van owners as well as users in particular professionals like tradespeople and contractors who depend on their vehicles for essential equipment and tools that they can't afford to lose. It's expensive to replace stolen goods but it can cause loss of income due to unexpected interruptions or the hassle of finding another transportation. Installing a top-quality van lock will help protect your assets and deter thieves while reducing the risk of loss and could even reduce insurance cost.

Hook Locks

A hook lock for vans is a powerful anti-theft device that is able to be fitted on the door of your vehicle. It is not connected to the lock on the vehicle and can only be opened by the driver using keys. It comes with a hook-shaped bolt that can't be forced to open and is made of high-quality materials. It's also extremely resistant against drilling and manipulation. Sold Secure is the UK's most trusted security product testing body. Many models are designed to meet the specifications of police officers and are endorsed by Sold Secure.

When buying a security lock for your van, you should be aware of the level of security you need. If you are carrying expensive tools or delicate cargo, then a more sophisticated lock, such as an slam or deadlock, will be better suited. If you are only carrying items of lesser value, then an ordinary slamlock could suffice. It is also advisable to review your insurance policy to make sure that the addition of additional locking mechanisms won't cause it to be cancelled.

When you are choosing a security lock system, you should also be aware of its weather resistance. The locks you choose should be able to withstand various weather conditions, as vans are constantly exposed to the elements. So, they don't lose their effectiveness and will be more difficult for thieves to manipulate. You should also update the software on electronic locking systems in order to enhance their performance and to prevent security weaknesses.

In the end, it's important to choose an option that is simple to install. Some models are made to allow DIY installation, while others require expert installation services to ensure that they're installed properly and work in the way they were intended to. Your level of expertise, confidence and the resources you have at hand will determine if you require a professional to install the product.

Catalytic Converter Locks

Catalytic converters are vital in reducing harmful emissions from your vehicle. This essential component is an easy target for thieves because of the precious metals that it contains. The black market value for these precious metals has led to an increase in the theft of converters. There are preventive measures to combat this issue.

Many people may assume that an alarm system that is simple will do the trick, but these systems are less effective than a dedicated device specifically designed to protect your converter. These devices are made to detect vibrations or heat and then emit a loud noise to scare away potential thieves. These devices are more akin to deterrents than protection systems and tend to be more expensive than a typical locking system.

The Cat Clamp converter lock, an exclusive design is a tried and tested solution to prevent catalytic convert theft. The device is constructed of stainless steel wire that runs around the catalytic converter as well as the frame of the car. The cable is wrapped seven times and locked which makes it difficult for thieves to remove the converter. This unit is easy to install and doesn't require drilling or welding. It is simple to install and can be utilized on a wide range of vehicles that include automobiles, trucks, and SUVs.

Another option to protect your catalytic converter is to install a metal plate that covers the entire unit. It's not as simple as putting up a cage made of metal, but it does make the converter less difficult to steal. The plates range between $150 and $270 depending on the brand.

Keep in mind that no security device is perfect, but taking preventive measures will lower the risk of theft. It is important to take the time to protect your vehicle will keep your possessions and you safe, and it can save you the cost of replacing a high-cost component. It's also an excellent idea to have your catalytic converter marked with your VIN, as this can help identify it should it be recovered and resold.

Anti-Peel Kits

Created to protect against the popular 'Peel and Steal' technique this solution is fitted to the front edge of the vehicles side load door. This increases the resistance of your van's doors to 'peel-and steal attacks by as much as 300 percent. The L4V Anti-Peel Kit, in combination with a high-placed hook lock, decreases the possibility that thieves can gain entry to your van via the side-loading door.

It is essential to employ additional van security due to the increasing number of van crimes and thefts. One of the most advanced methods is known as "peel and steal," and sees thieves swiping items and tools from vans get more info in a matter of seconds by applying pressure to the doors with their knees and then twisting, pulling and prying them open to reveal the contents of the area. This type of attack is now commonplace that has cost tradespeople across the UK thousands of pounds in lost stock and tools.

At Locks 4 Vans we have created a brand new high hook lock + anti peel kit for the Ford Custom to provide a cost-effective solution to this growing problem. The Anti-Peel Kit is fitted to the barn door of your Ford Custom reducing the chance of 'peel and steal' attacks by reinforcing the door's skin, and providing an additional layer of security. The built-in high L4V hook locks adds additional strength to the barn door and keeps it secure in the event that the anti-peel plate is taken off.

Online, you can order our anti-peel kit range and get it delivered to your vehicle within a few days. Our experts will then install the product for you. We have installers based in Greater Manchester and Tameside so are able to offer our services to areas such as Manchester, Salford, Stockport, Ashton Under Lyne, Oldham and Rochdale.

If you'd like more information about improving the security of your van, contact us today. We offer a range of options to enhance the security of your van. These include deadlocks, armour locks, and shielding to protect against puncture attacks.

Report this page